The BEL POWER SOLUTIONS INC ABC200-10XXG series 200W embedded switch mode power supply has an output voltage of 24VDC at 8.5A current. This AC to DC plug-in device with a single output has a high power density and incorporates boundary conduction mode PFC converter and soft-switching LLC converter resulting in increased system reliability and efficiency up to 91%. It has compact design and universal input supply voltage rating ranging from 90VAC to 264VAC at a frequency ranging from 47Hz to 63Hz.
Note:
Derate power above 50°C
High power density is 15W/in3
Active power factor correction
Power good signal
Over temperature, overvoltage, overcurrent and short-circuit protection
Low conducted
Tele communication
Data communication
Industrial equipment
Class A, EN55022 (EMC compliance)
Class A, IEC61000-3-2 (Harmonic Emissions)
UL 60950-1 second edition
CSA-C22.2 No. 60950-1-03 second edition
IEC 60950-1:2005
EN 60950-1:2006
CE certified
CB Approval
CSA certified
| 屬性 | 數值 |
|---|---|
| 輸出電壓 | 24 V 直流 |
| 輸出電流 | 8.5A |
| 額定功率 | 200W |
| 輸出數目 | 1 |
| 輸入電壓 | 90 → 264V 交流 |
| 安裝類型 | 底盤安裝 |
| 封裝類型 | 開放式 |
| 長度 | 101.6mm |
| 寬度 | 50.8mm |
| 深度 | 36.6mm |
| 重量 | 200g |
| 效能 | 89% |
| 最高溫度 | +50°C |
